Finished Cabinets

[les winter]

Really nice.

What is chopped denim?

Any details on the crossover available?

thanks.
Les

[nikki1]

The denim is blankets of chopped up denim which is then made into 16" x 48" batts. Pretty soft stuff and easy to work with. GPA likes it so good enough for me.

The X overs are Altec 501-8A's. I believe the X freq is 500 and it's set-can't be fiddled with. Or so I've been told. They have horn attenuater controls to balance the sound.

[valhallax]

hey nikki...
great job! way to rock out a project! got it done in a very short order
got a couple questions tho.. are those 511b horns? if not you will have to change the crossovers to either an 800 hz or the 1200 hz crossovers altec made, i like the 1209 crossovers myself. also, as for insulation, only three sides are enough, the back, one of the sides, and either the top or bottom.
have you had these cranked up yet? and i can well imagine you are hearing things with these that your other speakers just couldnt do, and at probably less than a watt as well!
nice build, thank you for sharing with us

[amandarae]

Very nice! Excellent job!

[nikki1]

Yes they are 511B horns with 806 drivers.

Cranked 'em up and they sound terrific. I hear things in some of my fav cd's I never did before. My wife's hearing is much better than mine for HF's , and she said to me "do you here the little bells?" No I don't. So there's a threshhold beyond which fiddling with them is pointless for me. Old ears and too much turbine whine for too many years.

I am not a super critical audiophile and frankly if I go to a store and listen to various speakers i have a hard time distinguishing between the " top end" systems. So it's hard for me to tell if I'm getting "all there is" out of these things. I may very well have over insulated the LF cabs as the bass sounds a bit muffled-not sharp with a definite "whack". I'm going to experiment with removing some insulation on one of them starting with the fronts to see if it makes a diff. If that helps then I'll try removing the insul on the bottoms.

[gearfreak]

Congratulations on the completion. Good job on matching the decor.

Can't tell that it's there for certain, but if removing you may want to start with that which is around the port as IIRC, it has been posted here that one would be best to leave the surface(/s) closest to a port, free from the damping material.

[nikki1]

I removed the stuff from the front and it helped some. Then took out what was on the bottom. Big difference. Where before it was sort of "muddy" and weak the bass is now strong and defined with more authority. Going to leave them as they are.